Your pool table light must be hung properly to ensure full illumination of your billiard courts, including rails, pillows and guide point height of your billiard lamp must be 32 "to 36" above the playing surface or table to bed the bottom of your lamp hlad.Opći method of determining the height of the billiard lights to your billiard lamp level with the bridge of the nose. Also when you adjust the height of your billiard lamp turn off any lights in the room and adjust the light so that no shadows on your desk.
Instructions for hanging your lights Billiards:
1. You must find the middle of the table game that is the length and width of the bed pool table, just do not Rails. Here are a standard play area billiard tables:
Billiard table size
6 'x 3' table has the game L 66 "W x 33"
7 "x 3'6" table has the game L 78 "W x 39"
8 'x 4' table has the game L 88 "W x 44"
8 'x 4' (huge) table the playing area L 92 "W x 46"
9 "x 4'6" table has the game L 100 "W x 50"
10 'x 5' table has the game L 112 "W x 56"
12 'x 6' table has the game L 124 "W x 62"
2. Then put a small piece of masking tape in the middle of your table fields. For example: If you have a 9 'x 4'6 "billiard table your playing field L100" W x 50 "Now take your tape measure (which should be in the same level of respect within the head rail) and use your middle diamond. Railway as guide and measure the L 50 "and mark with a small piece of tape and measure the width of which should be W25" and will give you the center of the gaming tables.
With a pool table lights are pretty heavy and ceiling brackets or hooks should be screwed into a ceiling stud. Use a stud finder to locate your ceiling studs. If a stallion is not available, you can consolidate your billiard light with strong drywall fasteners, such as the included Bolt .
3. Measure the distance from the center of your billiard light in the center of the chain on both sides of your pool light and mark these measurements on the ceiling. This is where our brackets will be screwed into the ceiling. Run your plumb line again to ensure your ceiling marks are aligned and focused on the pool of light.
4. Pre-drill a hole or two holes (if the two chains installed) in the stud / studs and drywall. Drill size Tip: hold fast technique to drill the mounting shank drill size is the same size as the shank or its mounting screw. Screw the mounting brackets securely to your pre-drilled holes.
Note: If you stand on a billiard table bed to install the lights, place a piece of dense foam or a thick blanket on his bed, pool table felt to protect .
5. Count the chain links on both sides to ensure your billiard lamp is level. Once installed, you can customize your billiard light height for proper lighting of your billiard table. That's it!
Tools they need: Ladder, tape measure, plumb line, small hand drill, screwdriver, folding probably screw, masking tape and pencil
